1. Coating adhesion: the adhesion of polyethylene plastic coating is ≥30N/cm, and the adhesion of epoxy resin coating is 1~3 grades.
2. Bending performance: the nominal diameter is not more than 50mm for bending steel-plastic pipes, no cracks occur after bending, and no delamination occurs between the steel and the inner and outer plastic layers.
3. Flattening performance of flange connection plastic-coated steel pipe: the nominal diameter is greater than 50mm, and the steel-plastic pipe is not more than 600mm, and no cracks will occur after flattening, and there will be no delamination between the steel and the inner and outer plastic layers.
4. Sanitary requirements: The inner plastic layer of the steel-plastic pipe for transporting domestic drinking water, cold and hot water should meet the requirements of GB/T17219.
5. Pinhole test of coated plastic layer: with an electric spark detector, the entire inner and outer surfaces of the steel-plastic pipe provided by the test are inspected, and there should be no electric sparks during the detection.
6. Fire resistance test of flange connection plastic-coated steel pipe: The steel-plastic pipe for fire protection should be able to withstand the fire resistance test for 15min, and there should be no leakage and deformation damage after the test.

Add:Beilu Village, Xiaoying Township, Yanshan County, Cangzhou City, Hebei Province
TEL:131 8498 7126